Yahoo Clever wird am 4. Mai 2021 (Eastern Time, Zeitzone US-Ostküste) eingestellt. Ab dem 20. April 2021 (Eastern Time) ist die Website von Yahoo Clever nur noch im reinen Lesemodus verfügbar. Andere Yahoo Produkte oder Dienste oder Ihr Yahoo Account sind von diesen Änderungen nicht betroffen. Auf dieser Hilfeseite finden Sie weitere Informationen zur Einstellung von Yahoo Clever und dazu, wie Sie Ihre Daten herunterladen.
If you compress water strong enough will it turn into ice?
In theory, if you compress water strong enough would it turn solid and into ice? If not what would water become if you compress it strong enough?
8 Antworten
- Andrew SmithLv 7vor 6 Tagen
To add to Bill Russel's answer. At high pressures, but less than the pressure described, ice skates can cause a small part of the ice to melt. Giving a lubricating film of water. This is different from most other materials.
- Anonymvor 7 Tagen
Sure, it will rise the freezing point temperature up !!!
- ?Lv 5vor 7 Tagen
Theoretically if you compress water enough you lower it's freezing point and water can become ice at room temperature
- Wie finden Sie die Antworten? Melden Sie sich an, um über die Antwort abzustimmen.
- PhilomelLv 7vor 7 Tagen
No, when you compress it is absorbs heat.
If you put water into a vacuum chamber it will boil until it freezes.
- ?Lv 7vor 7 Tagen
The answer is an unqualified "yes." If you look at Bill Russell's nice phase diagram, you'll see that even at 400C, a pressure of a few hundred thousand atmospheres would suffice to compress the water to ice. That pressure may sound high, but consider that the pressure in the core of the sun is around 250 billion atmopheres. What actually happens in an environment like that is that any water would be pushed out in favor of substances with higher densities. Devices on earth have been constructed to exert pressures of several million atmospheres, so could compress fairly hot water to ice.
- billrussell42Lv 7vor 7 Tagen
at what temperature? at room temp, 25ºC, yes, if the pressure is
greater than 1 GPa (10000 bar). That would be ice VII (ice has many different crystalline structures)
but it would go back to liquid as soon as the pressure is released.
it would change to vapor (boil) if the pressure dropped below 3 kPa (normal 1 atm pressure is 100 kPa)
- busterwasmycatLv 7vor 7 Tagen
you have to go to very high pressures before the atypical negative P/T slope of the solid-liquid phase boundary reverses and you can make ice by pressurization rather than the reverse as happens at lower pressures (pressurization can cause melting at low temperatures).
That is, even though increasing pressure makes liquid water more stable (stable over a wider range of temperatures) at low pressure, eventually that does reverse and water/ice behaves as all other solids do, where pressure makes melting more difficult rather than easier. We don't see any such pressures in our near earth-surface environment, so our practical experience is that pressure on ice can lead to melting rather than solidification from liquid as is generally the case.
Eventually, though, the pressure dominance does take hold.