d3c0y

In past years all manager names have been viewable but this year for some reason they are all "--hidden--" in league view. Is there a way to make public all manager names within league view?

X<-1/3 and x≥-4/3 (already simplified)

would the answer be (-∞,-4/3] U (-1/3,∞) ?

F winter break >_<

Can waveform be parallel? Do perpendicular lines have to be straight or just have to meet at a 90 degree angle on their paths?

Thanks!

Who exactly owns these cables? I would assume the cable company. So the FCC just regulates how they are used? Trying to put this all together, in regards to fiber, coax, copper, and etc.

So I'm making a beer pong table and I'm tryin to use vinyl sticker to make cup location and one in the middle for decoration. Can I apply my polyurethane coat over the wood as well as the vinyl sticker or should I put the sticker on after I apply the coat? Thanks!

Some kind of beetle?

http://www.k2notwork.com/DSC_0008_008.jpg

I'm preparing to test for my 06 Low Voltage License. I have a 2005 book but it is in bad shape and I'm going to upgrade to the 2008 version. For testing would you recommend 2008 code book or the handbook? I want the handbook but I'm worried it will mess me up with all the extra writing in there and not sure if they even have tabs available for the handbook. Any advice would be greatly appreciated, thx!

Regards,

Chris

*I posted this in the DIY section in hopes there would actually be electricians looking around in here.

I'm following a daily deal site that tweets at a random time everyday. Any way for me to be notified via email when this account tweets? Searched goog and didn't find any services that looked like they did the trick. Thanks!

There is some 2 way voice equipment in the house and the off hook voltage is only at 4 to 4.1vdc. Our equipment is seeing this as a dead line. The wiring is good, is there anything the phone company can do to increase off hook voltage? Oh btw, the on hook voltage is nearly 58vdc. These are verizon copper line phones (not FIOS). Thanks!

Just wondering what might be the cause of this if anyone knows off the top of your head. The bullets in the lower section look fine in IE but indented to the right in FF. Thanks

http://mynetworkcompany.com/home.aspx

Said name customer has debit system (POS) on a DSL line with a dynamic IP of course. He wants to remote his DVR to view his shady employees while home. 4 cameras at 380x420 res I estimate need at least 2mbs up to stream decently. He gets 1.5 down and 1 up on his DSL. If we add a second DSL line with a static IP for the DVR, could I then install a load balancing router to double his upload speed? So I'd have the first dynamic ip modem going to a switch, the POS/debit system plugged into that switch, that switch going to the load balancing router, and also the second DSL line going to that load balancing router. Will this all work and anyone recommend a good load balancing router if my theory is in fact correct? Thanks for any help as I'm not familiar with load balancing routers.

http://www.askmehelpdesk.com/attachments/electrica...

Leviton PR180

The sensor nearest the light will trigger it 100% of the time but the one furthest away will trigger it about 50% of the time. Any ideas?

So here's my diagram: http://i40.tinypic.com/ve5h7c.jpg

I'm using 2 Leviton PR180's (motion detectors)

I'm pretty sure that diagram is right, I didn't wire it myself so if anyone knows how i can verify this plz let me know. How would I wire this so either switch will turn on the light? The standard switches that were here before pissed me off. If the switch downstairs was off then the one upstairs was useless. I just want to be able to use switch 2 when switch 1 is off and visa versa. I'm trying to finish this tonight so just msg me if you need more details! Thanks!!!!

Hooked up a remote dvr for a client. He has Embark DSL (600kbs down and 100kbs up). I have a Linksys WRT54G router setup off of a 660 series Embark DSL modem. The modem is set to Bridge and the router is providing internet to a computer and the DVR. I have ports 554-557, 1600, and port 80 forwarded to the DVR so all inbound WAN traffic will direct to the DVR for remote viewing (built in viewer). I'm getting a horrible ping of about 800-1200 when I ping the IP and the connection drops out when I try to connect probably because of this high latency. Any idea??? Thanks!

So my girlfriend is small. She's 5'1" about 115lbs and wears a size 7. I've skied my whole life so I don't know much about snowboarding. I went to an online snowboard size calculator and it said she's a 138. Should I get her a kids snowboard? Is that the only way I will find a size 138 or is there also an adult 138? How about bindings? Are there certain size restrictions to those? Any help would be greatly appreciated. Maybe you know a good place online to order a package deal? I'm in Seattle, WA btw, thanks!

So I'm booting via CD and all is well. I have a MSI K8N Mobo (MS-6702). I boot and type: ADSFI715 A6702VMS.710 and it only takes me to the AMI Flash Utility. I try enterying that command line again and It just basically refreshes the utility page. Just wondering where I'm going wrong here, can't find anything conclusive online to help. It seem likes AMI flash utility wants a .rom file but MSI website gave me the .### file.

Anyone know which VAIO are interchangeable as far as enclosures go? I have a cosmetically damaged PCG-7K1L sony VAIO but can't find one on ebay that is damaged to buy for parts. Maybe someone knows where they make entire skins for these? Or can I take everything out and put it in a custom laptop enclosure? Thanks!!

Can my friend here play online in xbox live as a guest on my console? If not could he get an xbox live account and play on the same console? Thanks!

So here's the question I got.

16 + 28 ÷ 2 - 6

---------------------

10 - 4 x 2

Now the answer I get is 1.3 repeating.

But here is the multiple choice answers they offer:

A. 10

B. 8

C. -2.4

D. -4.8

Now I know it is midnight and my brain might have fried but anyone out there with a conclusive answer plz respond. Thx!!!

So I got this crazy problem. My bathtub only drains when it's above a certain level but I can plunge it down. My toilet doesn't completely flush and I have to hold the handle down. It's almost like there has to be a certain amount of water in the line for the water to continue. The tub and toilet I speak of are in the same bathroom. I've got a snake, I just poured some Draino down the bathtub. Just posting this question to make sure I'm doing everything right. I'm on public sewer and not septic. Could this still be a venting issue? Thanks for any help you can provide.