zz06

Did the 90 deg washing cycle on Asko for cleaning and put in 20g or 4 teaspoons of citric acid.

Machine looks nice and clean but a couple of times I heard a squeak as it turned ot the left which went away with water and after the spin...

So is citric acid and 90 deg wrecking the bearings or seals (Asko has no seal to go mouldy between the drum-- bellows or whatever it is called)

Hi,

My Toshiba Satellite Pro c50b says the battery is

14.8v 45whr 2800mAh

Replacement for some reason (they say it is from Toshiba) says

14.8v 32 whr 2085 mAh

The other one got 5 hrs on the battery will this be significantly less. The computer shop on the phone thinks only 30mins or so less and not a big difference.

I went to get my teeth professionally cleaned 2 months ago. My back molars looked white.

Now they look yellow, yet I brush.

Have I lost enamel in just 2 months?

6 weeks and the hole is less wide, more like a line but not closed up yet.

Is this normal. I think i still see the clot.

I had a baby tooth removed as an adult and it was a surgical extraction

Toyota Corolla 2003 Hatchback Ascent . Goes about 10km into town and back every few days. Country town so not many stops .

Parents haven't serviced it since March 2015.

It was meant to be done at 10,000km but now on 13,000km

I eat them every day , at least 1 . I brush about 1 hr or more later.

I heard the citric acid in them is really bad for the teeth.

I thought a soda eg Coke would be heaps worse.

I mean, can you get a ton of holes in teeth from eating oranges ?

29 just one small filling at the back . When I was a kid I was told I need braces but now as an adult I told it was optional and more aesthetic.

My front tooth is slightly chipped at the bottom and not straight.

How do my teeth look when u see them ? Good or bad ? They look better I think when teeth are down then open ?

I had not been to a dentist for 14 years (now 29 years old ) . Just got a clean and a small filling.

I always brush every day with an electric toothbrush, although till recently did not floss all the time.

http://imgur.com/a/lbc7t

Why are plastics used in some fridges so thin these days. Is it a cost saving thing, or, is it more to do with sustainability and using less resources to make the plastics

Have been given a barcode to print out to get money off my shopping at the grocery store. However no matter how i try to print the bars will show but not the numbers below. can barcodes be read still without the numbers printed below the bars ?

We have an 8 year old dishwasher. It was just supposedly fixed as it was leaking , they replaced the hose which was perishing on the rubber bit

Still is leaking when filling up. What is the next cause more than likely ?

How much power will I save. My old fridge used 740kwh a year and the new one is 411 kwh a year. Power is 25c a kilowatt hour.

Any help would be appreciated as to the savings in $ a year or month or quarter ?

When I slow down in a manual transmission I go down the gears and then brake and then towards the end put the clutch down.

However, when reversing I saw a video when they stopped reversing, they put the clutch right down and then braked ?

If car is moving really slowly do you put te clutch down then brake to stop it stalling ?

I am making this rissole recipe

http://www.taste.com.au/recipes/17475/rissoles

I have every ingredient except zucchini

What can I use instead ? I have mushrooms , peas, broccoli beans, etc in my freezer fridge

Watching tv online on a desktop pc ? with 19 inch lcd screen

Or watching tv on a 32 inch lcd tv with a PVR.

Ok So I our digital set top box has a remote which is dying.

I went on the manufacturers spare parts site and they only have a slightly different set top box model

I am 3103hdrc this one is 3105hdrc but it seems to use the exact same remote control as the slightly older version of that set top box

So should this mean the Grundig 3105 remote will work on my 3103 box ?

I think the box was a slight change from the older one in shape .

Hi

Just wondering, I have an old HP printer bought in 2006 and I can still use remanufactured/generic cartridges with no issues at all.

Have the companies now changed their newer printers as to not accept generic cartridges ? I am curious ?

Or is it still possible. Any opinions appreciated.

I buy a HP 21XL online it costs $14 , works ok can't see the difference. In fact I reckon I may even get more printing out of the generic.

Thanks.

We have an Electrolux Dishlex dishwasher bought in Australia in 2007 and after 7 years the PCB (not sure what this is) apparently needs to be replaced as the water no longer heats. The electrician said the element works fine etc.

So is Electrolux Dishlex a cheaper brand compared to Bosch dishwashers ?

We have an LG Fridge from the year 2000 . It is still going as good as new. This was bought in Australia for something like $1700 back then for a 500 and something litre one.Think they are $1000 or less now.

Is LG still making them like this if we were to replace it for energy efficiency reasons ? I think this one was made in Korea only the light has gone and been replaced !

Can fridges bought in 2010- now still last at least 10 years to 15 years ? Most products I have bought that are LG have lasted ages without any issues at all, televisions, mobile phone dvd player etc.