samim doost

You need to design a digitizer for a communication system connecting a microprocessor to a display driver chip on a PCB copper trace.?

The communication speed is slow, so the bandwidth of the copper trace is essentially infinite. ?The communication system uses 4-PAM with levels {0,0.25,0.5,0.75} Volts. The receiver has an input-referred noise standard deviation of 10mV.

Thanks

I am new to IGBTs and struggle reading the Data sheet. I am looking for four IGBTs to make a full bridge inverter for Tesla coil. The Tesla coil draws current of 50A at 600V. I want a switching frequency of 50Khz. Can anyone recommend me which IGBT to use? Please share the datasheet link.

Thanks in Advance!

A binary encoded signal has a bit-rate of Rb = 56 kbps. A Polar RZ line-code is used to encode these bits for baseband transmission over copper wire. What would be the transmission bandwidth required to transmit this signal?

A 14 kHz

B 28 kHz

C 56 kHz

D 112 kHz

Suppose I have an array char Description[500]

I want to write this in a file but maximum column I can write in file per line is 80 Column. I want to know how to break Description into pieces.Any idea?

Suppose I have an array char Description[500]

I want to write this in a file but maximum column I can write in file per line is 80 Column. I want to know how to break Description into pieces.Any idea?

My code was working an hour ago.

when i compiled minute ago it shows this error

gcc -g -lm -ansi -Wall -pedantic pms.o pms_options.o pms_utility.o -o pms

Undefined first referenced

symbol in file

generate pms.o

ld: fatal: Symbol referencing errors. No output written to pms

collect2: ld returned 1 exit status

*** Error code 1

make: Fatal error: Command failed for target `all'

is there any way to debug for this error using gdb??

Thanks alot

I have array of char something like this--->program1|program2|program3|program4|program5

how to get the last token(program5) without using strtok

For example i have one function void function(how to pass array of string as pointers?)

I have an array of program id for example i.e,P30234,P30324,P34253, and i want to pass these values to the function i mentioned above.Show me how to point to these array, how to pass them as a pointer in function.

and also how do you loop it to access each string at a time. Don't just explain in words, I need answers as examples. Thanks alot.

The user should only be allowed to access a page after login i have a page called news.html and signin.html. I am new in php I want the user to login in to access to news.html page. Any sugesstion. Give example in codes

I have sturcture which is given to me

typedef struct program* ProgramTypePtr;

typedef struct course* CourseTypePtr;

/* Structure definitions. */

typedef struct teachPeriod

{

char semester; /* 'y' or 'n' for each semester */

unsigned year; /* 2010 by default */

} TeachPeriodType;

typedef struct course

{

char courseID[COURSE_ID_LEN + 1]; /* Unique ID for a course */

char progID[PROG_ID_LEN + 1];

char courseTitle[MAX_TITLE_LEN + 1];

char courseCode[COURSE_CODE_LEN + 1];

unsigned creditPoints;

TeachPeriodType teachPeriods[NUM_TEACHPERIODS];

char courseDescription[MAX_DESC_LEN];

CourseTypePtr nextCourse;

} CourseType;

typedef struct program

{

char progID[PROG_ID_LEN + 1]; /* Unique ID for a program */

char progTitle[MAX_TITLE_LEN + 1];

char progMajor[MAX_TITLE_LEN + 1];

char progCode[PROG_CODE_LEN + 1];

float progDuration;

char progType[PROG_TYPE_LEN]; /* Undergrade(UG) or Postgrad (PG) */

char progMode[MODE_LEN]; /* Full-time (FT) or Part-time (PT) */

char progDescription[MAX_DESC_LEN];

char majorDescription[MAX_DESC_LEN];

ProgramTypePtr nextProgram;

CourseTypePtr headCourse;

unsigned numCourses;

} ProgramType;

typedef struct pms

{

ProgramTypePtr headProgram;

unsigned numPrograms;

} PMSType;

I just wana know how to add programs and add courses. Each program can have many courses.

In my lab i was told to impelement a function

substring(char * substring,char*string){

}

function's property

Enter substring:def

Enter the string:abcdefdelmde

def is substring of abcdefdelmde

Can anyone do this for me plz? to implement it

I

I have an array of char which is mixture of alphabetic,numeric,symbol values.

for example char[ ]={'a',1,3,4,'B','[','z',}

I need to make a function that will extract alphabetic characters only and store it in other array and return the value of that array

extractAlphabets(char* line){

}

Can anyone help me how to do this.

I am writing an if condition

it is if(value is not an alphabetic character){

do something

regards

}

I dont know any efficient way of doing it. I can do that but it will be so long

if(value!='a'||value!='b'...............value!='z')

{body}

Does anyone know how to write a condition to exclude all alphabetic characters

C programming fgets help please?

I am given assessment to use fget(not scanf or anything else)I made a menu and when I want to enter a choice fgets doesnt work, it shows error. I am working on it for 5 hours still didnt get it. Even it has not mentioned in textbook in detail about fgets. and

int main(void)

{

int optionStats[NUM_OPTION_STATS];

char choice;

do

{

printf("Menu\n\n");

printf("1. Translating alphabetic number\n");

printf("2. Fibonacci numbers\n");

printf("3. Sort\n");

printf("4. Find substrings\n");

printf("5. Session summary\n");

printf("3. Bushfire\n");

printf("6. Exit\n");

printf("7. Go Again\n");

printf("Enter your chose: ");

fgets(choice,size(choice),stdin);

fgets(choice,sizeof(choice),stdin);<<<<<… work

if(choice=='1'){

char input[10];

printf("%s","Enter Alphabetic Phone Number:");

fgets(input,sizeof(input),stdin);<<<<<… work at all

translateNumber(0, input);

char c[1];

printf("\nPress enter to continue..");

fgets(c,1,stdin); <<<doesnt work

}

while(choice!='7')

I am given assessment to use fget(not scanf or anything else)I made a menu and when I want to enter a choice fgets doesnt work, it shows error. I am working on it for 5 hours still didnt get it. Even it has not mentioned in textbook in detail about fgets. and

int main(void)

{

int optionStats[NUM_OPTION_STATS];

char choice;

do

{

printf("Menu\n\n");

printf("1. Translating alphabetic number\n");

printf("2. Fibonacci numbers\n");

printf("3. Sort\n");

printf("4. Find substrings\n");

printf("5. Session summary\n");

printf("3. Bushfire\n");

printf("6. Exit\n");

printf("7. Go Again\n");

printf("Enter your chose: ");

fgets(choice,size(choice),stdin);

fgets(choice,sizeof(choice),stdin);<<<<<<<doesnt work

if(choice=='1'){

char input[10];

printf("%s","Enter Alphabetic Phone Number:");

fgets(input,sizeof(input),stdin);<<<<<<doesnt work at all

translateNumber(0, input);

char c[1];

printf("\nPress enter to continue..");

fgets(c,1,stdin); <<<doesnt work

}

while(choice!='7')

I have made a new superstare but when i play online even the created content is turned on but i cannot see my created superstar.Any suggestion?

I have three classes JFame,JPanel,LeftPane and ActionListener class.I have a button in LeftPane and i am trying to change the visibility or add or remove the JPanel from JFrame when the button is clicked. I have implemented the ActionListener to do this and then i wrote frame.validate to bring changes in Frame during runtime, but it doesnt work

Can anyone give me a small example how to do so or is there sourse code online please send me link

Thanks alot

Hi, I am making a MVC model in java. I have a class called class1

Using UI when i add a course by filling some parametre, this course will be added in Program object. When i add course second time, the first one is gone and second one is the first one. It is hard for me to initialise Course object many times for the new courses to be added. Can any one tell me how to do it

My code is here

public class Initialiser {

private AMSFacade facade;

private String courseType;

private String courseCode;

private String courseTitle;

private String[] Prerequsite;

private ElectiveCourse electiveCourse1;

private CoreCourse coreCourse1;

private Program program;

private Course[] course= new Course[100];

private int count = 0;

public Initialiser() {

}

public void addProgram(String code, String title) {

facade = new AMSFacade();

program = new Program(code, title);

facade.addProgram(program);

}

public void addCourse(String couseType, String courseCode, String title,

String[] prerequsite) {

facade = new AMSFacade();

addProgram("COSC", "ComputerScience");

System.out.println(prerequsite + "prerequsite" + courseTitle);

if (couseType.compareTo("elective") == 0) {

course[count] = new ElectiveCourse(courseCode, title, prerequsite);

courseUpdate(new ElectiveCourse(courseCode, title, prerequsite));

count++;

} else {

course[count] = new CoreCourse(courseCode, title, prerequsite);

courseUpdate(new CoreCourse(courseCode, title, prerequsite));

count++;

}

}

public void courseUpdate(Course course) {

try {

facade.addCourse(course);

} catch (ProgramException e) {

// TODO Auto-generated catch block

e.printStackTrace();

}

I have an array of Course so whenever i use addCourse method, the course should add to the array using CourseUpdate method there.

But this doesnt work, i can only see one method when i call the method .getAllCourse.length

}

Question::List the actorID,firstname,and last name of actors who have ONLY played in drama movies,together with the number of drama movies each actor played. output should be in descending order of number of movies each actor played

the databse is here

MovieInfo(mvid,title,firstname,lastname) where mvid is primary key

Cast(mvID*,actorID*) both of the attribute are primary and forign key

Actor(actorID,firstname,lastname,genre,birthplace) actorID is primary key

Genre(mvID*,genre) mvid and genre both are primary key and mvid is foreign key too

Thanks in advance